Pd/C气体扩散电极用于电生成H2O2降解苯酚的研究

采用自制的Pd/C气体扩散阴极和Ti/IrO2/RuO2阳极,在无隔膜电解槽中对苯酚模拟废水降解效果及机制进行了研究,采用电子自旋共振法(ESR)对电解体系中产生的羟自由基(·OH)进行了检测.结果表明,在Pd/C气体扩散体系中掺杂Pd催化剂可以促进H2 O2的生成(H2 O2的稳定浓度是7.5 mg/L),有利于·OH的产生.经电化学氧化处理120 min后,苯酚和COD的去除率分别达到97.2%和50%,表明在电催化氧化过程中苯酚被氧化生成了大量低分子量中间产物.废水的BOD5/COD值达到0.73是处理前的9.1倍,苯酚废水的可生化降解性通过电化学氧化处理后显著提高.在该电化学体系中苯酚的降解是在阳极直接、间接氧化及阴极产生的H2 O2、·OH的氧化共同作用下完成的.通过对紫外扫描光谱图的分析推断出苯酚在电解过程中有醌类物质生成;由GC-MS检测到了邻苯二酚、对苯二酚、苯醌等芳香族化合物和己二酸、顺丁烯二酸、反丁烯二酸、丁二酸、丙二酸、乙二酸等短链羧酸,据此提出了苯酚降解的可能历程.     

食物缺乏对方斑东风螺幼螺代谢的影响

通过室内模拟测定了方斑东风螺幼螺在禁食120 d中耗氧与氨氮排泄的连续变化.结果显示,随着饥饿时间延长,幼螺耗氧率呈指数式下降;排氨率先较快下降后有一定程度回升,实验结束时分别下降为对照的37.02%,75.32%.饥饿60 d前,氧氮比(O/N)较高(35.34～46.56),60～90 d有所下降(25.92～28...     

中国火山/火山岩景观地质公园展望

本文概略介绍了中国大陆4个火山(岩)为主题的世界地质公园和16个国家地质公园,以及中国香港和中国台湾的两个地质公园。文章还介绍了这些地质公园火山岩喷发时代、火山类型、大地构造环境和火山(岩)景观特征与分类。它们的喷发时代主要为更新世-全新世、中新世、始新世和白垩纪。四个时期的火山地质公园,在不同年代火山中均具代表性与典型性,为中国火山/火山岩研究提供了真实的材料。作者还针对火山地质公园建设现状提出加强科学研究与实施解说系统工程两条建议。     

A／O法在合成氨工业终端废水处理中的应用实例

主要介绍了合成氨工业废水的排放特点,A／O法处理工艺原理,以实例说明A／O法适用于实施清洁生产的合成氨企业的终端废水的处理。     

智能化控制SBBR处理不同C/N城市污水脱氮除磷性能研究

采用自主研发的智能化控制系统,以智能化控制的运行方式使序批式生物膜反应器(SBBR)形成交替运行的好氧-缺氧环境,对不同C/N人工模拟城市污水进行了脱氮磷实验研究.该实验中控制反应器内水温为25℃±1℃,曝气量为150 L/h,进水COD浓度为300 mg/L、TP浓度为5 mg/L,以TN浓度为30、60、90 mg...     

聚糖原菌富集实验及其内源过程探究

细胞衰减是微生物内源过程的一个重要组成部分,可分为由细胞死亡引起的数量衰减和由细胞活性降低引起的活性衰减两部分.通过挥发性脂肪酸（VFA）吸收速率(VFAUR)测定、荧光原位杂交技术（FISH）以及LIVE/DEAD细胞染色技术,研究了富集聚糖原菌（GAOs）在序批式反应器（SBR）系统中好氧环境下的衰减特征.结果表明,当T=30℃、进料中m(COD)∶m(P)=100时,SBR系统中GAOs富集比例达94%.测定和计算表明,SBR富集系统中GAOs衰减速率和死亡速率分别为0.132 d^-1和0.034 d^-1,其数量衰减和活性衰减占其细胞总衰减比例分别为26%和74%.可见,GAOs数量衰减只占其细胞总衰减中很小一部分,而绝大部分衰减由活性衰减所引起.     

Mg/Al双金属氧化物对As(V)吸附性能的研究

研究了以镁铝水滑石为原料制备的Mg/Al双金属氧化物对溶液中As(V)的吸附作用及其影响因素.结果表明：Mg/Al双金属氧化物对As(V)具有较强的吸附能力,吸附规律符合Langmuir等温吸附方程,根据计算所得的理论最大吸附量为51.02 mg·g-1,与实验得出的最大吸附量50.53 mg·g-1基本一致;运用3种...     

粗粒子气溶胶远距离输送造成华南严重空气污染的分析

2009年4月末,发生了一次罕见的粗粒子气溶胶远距离输送造成华南地区出现严重的空气污染事件,其特征主要是气溶胶质量浓度超标,而能见度没有明显恶化,对这次空气污染事件进行分析的结果表明.在过程中,粗细粒子质量比(PM2.5/PM10)有明显的3次下降,最低达到0.3,即PM2.5仅占PM10的30%,这与珠江三角洲地区通常以细粒子为主的污染特征有很大不同,反映了外来粗粒子的侵入特征.长江流域浮尘天气的沙尘粒子变性后,长距离输送污染物叠加本地污染物,造成这次严重空气污染事件.     

Effect of manufacturing methods of AgCl/Al2O3 catalyst on selective catalytic reduction of NOx

The AgCl/Al2O3 catalyst has potential for use in the selective catalytic reduction (SCR) of NOx. A compound hydrocarbon, following oxygenation is used as a type of reducing agent. In this experiment, the AgCl/Al2O3 catalyst was produced by four different methods, and the differences among their reduction catalysis of NOx were compared. Ethanol was used as a type of reducing agent. X-ray diffraction analysis was performed to study the crystalline structure and scanning electron microscope and transmission electron microscope (TEM) were applied to determine the microindentation. The results indicated that, in the range of 350–400°C, there was no significant difference on the NOx reduction rate; however, there was dispersion at high and low temperature ranges. The size of the AgCl particles was about 20–100 nm.     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.